產品[
法國dosatron金屬切削液比例泵DI520
]資料
如果您對該產品感興趣的話,可以
產品名稱:
法國dosatron金屬切削液比例泵DI520
產品型號:
DI520
產品展商:
dosatron
簡單介紹
來自法國的dosatron水利比例配比泵D310RE,擁有*大比例配比,范圍5%-20%,如此大的添加范圍完全能勝任任何切削液的配比工作,他的出色表現完全可為車間節省一位熟練的操作工,讓您在降低成本的同時又能感受**配比帶來的好處。
法國dosatron金屬切削液比例泵DI520的詳細介紹
運行原理
Dosarton注入泵直接安裝在供水管路上,依靠經過的水流作為運行動力。水驅動Dosarton注入泵運行,按照需要的比例將濃縮液從容器中直接吸入并注入到水中。在Dosarton泵內,濃縮液與水充分混合,水壓將稀釋混合液輸送到下游管網。不管供水管路上的水量和壓力發生什么變化,所注入濃縮液的劑量與進入Dosarton泵的水量始終成比例。
DI520主要規格參數
注入比例調節范圍 5%~20%(1:20~1:5)
運行時水流量范圍 10升/小時~1.5立方米/小時
運行水壓 0.5~4BAR
濃縮液(母液)注入流量 0.5升/小時~300升/小時
High precision dosing
The DOSATRON water powered dosing pump is a simple and ingenious system that has demonstrated its worth for more than 30 years in about a hundred countries. Installed directly in the water supply line, the Dosatron operates without electricity ; it uses the flow of water as the power source. The water activates the Dosatron, which takes up the required percentage of concentrate and injects it into the water. Inside the Dosatron, the concentrate is mixed with the water, and the water pressure forces the solution downstream. Once adjusted, the dispenser requires no action or external control . The dose of concentrate will be directly proportional to the volume of water entering the Dosatron, regardless of variations in flow and pressure which may occur in the main line. The high dosing precision eliminates all risks of overdosing, thus contributing to respecting the environment.
|  |
適用領域:
環境-衛生-水處理-車輛清洗-金屬加工-食品加工-書畫刻印藝術-園藝-畜牧等
主要應用:
****-**-清洗-施肥-植保-添加-潤滑-PH\TH校正-衛生-絮凝處理-車輛清洗等
安裝
規程:在安裝Dosarton設備之前,應咨詢并符合當?shù)赜嘘P(guān)的水管理規程。
為達到*佳Dosarton使用效果,請遵守下列我們提出的安裝建議:
-根據應用的水質情況,在Dosarton設備的上游位置安裝一個過濾器(300目[60微米])。
-每年更換一次注入器密封墊圈。
-經常用清水清洗。
-若要調節注入比例,應先關閉供水管閥門,并使水壓降到為零。
-安裝必要的保護裝置(流量壓力調節器等)。避免受到超大流量和壓力以及水錘的危害。
-將Dosarton設備安裝在整體旁路上。
若想了解其他安裝建議,請向我們咨詢。