|
|
|
|
產品[
clark磁力驅動泵
]資料
如果您對該產品感興趣的話,可以
產品名稱:
clark磁力驅動泵
產品型號:
clark磁力驅動泵
產品展商:
其他品牌
簡單介紹
clark磁力驅動泵
CLARK SOLUTIONS
AM Series Magnetic Drive Chemical Pumps
Flow Rates to 55 GPM, Pressures to 22 PSI
DESCRIPTION
The AM series chemical pumps are centrifugal, horizontal axis, cl
clark磁力驅動泵的詳細介紹
clark磁力驅動泵
 |
|
|
| |
|
 |
CLARK SOLUTIONS
AM Series Magnetic Drive Chemical Pumps
Flow Rates to 55 GPM, Pressures to 22 PSI
DESCRIPTION
The AM series chemical pumps are centrifugal, horizontal axis, close-coupled type. The bodies are entirely built with reinforced thermoplastic polymers. Materials for the internal components include ceramic oxides, HD carbon and fluorinated elastomers. Any fluid contact with metallic pump parts is avoided.
These chemical pumps are an excellent choice for small scale chemical pumping applications. |
|
 |
|
|
FEATURES
“Hermetic” Pump
A drive magnet assembly (item 7 of cut away dwg.) is driven by
the motor shaft. This magnetic field acts on the magnet that is
molded into the impeller assembly (item 4). The rear casing
(item 2) isolates the drive mechanism from the impeller
assembly and the fluid media.
1) Volute Casing
|
6) SS Screws
|
2) Rear Casing
|
7) Drive Magnet Assembly
|
3) O-Ring Gasket
|
8) Support
|
4) Centrifugal Impeller
|
9) Flange for NEMA Motor
|
5) a/b Guide Bushings
|
10) Electrical Motor
|
Safety & Life
The magnetic drive system, which excludes any type of rotating seal, extends
pump life. The only seal required is a static o-ring gasket between the volute
casing and rear casing. The “R” version of the pump (see tables 2&3) has
materials that tolerate dry running for 15 minutes to hours (depending on
operating conditions and materials selected).
Versatility & Performance
Two housing materials, style WR, glass fiber reinforced (30%) Polypropylene,
and style GF, Ethylene-ChloroTrifluoroEthylene carbon fiber filled (20%) are
offered along with a choice of internal materials. Depending on material choice,
the pumps handle applications from clean water to waste and slightly abrasive
liquids, strong alkali or salts such as sodium hypochlorite, and acids such as
chromix, nitric, sulphuric, etc.(see compatibility chart ). The mechanical
properties of the reinforced housing materials allow the use of the pumps
with fluids containing solids with medium grade of abrasion. For example a
pump supplied with “X” internal materials (see table ) can handle solids up
to an index hardness of Mohs 4, a maximum quantity in weight of 5%, and
a maximum size of 0.25 mm.
A selection of impellers accommodates a range of liquid specific gravities.
|
|
|
MATERIALS
| Media Compatibility |
| Medium |
WR |
GF |
V |
K |
| Cold mineral acids |
++ |
++ |
+ |
+ |
| Hot mineral acids |
0 |
++ |
- |
+ |
| Cold oxidizing acids |
- |
++ |
+ |
+ |
| Hot oxidizing acids |
- |
++ |
0/- |
+ |
| Cold inorganic salts |
++ |
++ |
+ |
+ |
| Hot inorganic salts |
+ |
++ |
+ |
+ |
| Cold inorganic bases |
++ |
++ |
-(*) |
+ |
| Hot inorganic bases |
++ |
++ |
-(*) |
+ |
| Cold alogens |
- |
+ |
+ |
+ |
| Hot alogens |
- |
+ |
- |
+ |
| Cold aliphatic solvents |
+ |
+ |
+ |
+ |
| Hot aliphatic solvents |
- |
0 |
0/- |
+ |
| Cold aromatic solvents |
- |
+ |
0/- |
+ |
| Hot aromatic solvents |
- |
0 |
- |
+ |
| Cold functional aromatic solvents |
- |
+ |
- |
+ |
| Hot functional aromatic solvents |
- |
0 |
- |
+ |
| Cold chlorinated solvents |
- |
+ |
- |
+ |
| Hot chlorinated solvents |
- |
0 |
- |
+ |
| Cold alcohols |
++ |
++ |
-(*) |
+ |
| Hot alcohols |
+ |
+ |
-(*) |
+ |
| Cold ethers |
- |
+ |
- |
+ |
| Hot ethers |
- |
+ |
- |
+ |
| Cold ketones |
+ |
+ |
|
+ |
| Hot ketones |
0 |
0 |
-(*) |
+ |
| Cold amines |
+ |
+ |
-(*) |
+ |
| Cold polymer solvents |
++ |
0 |
+ |
+ |
| ++= Excellent + =Good 0=Moderate -=Not Resistant |
| (*)=Use EPDM |
ABBREVIATION LEDGER
GFR/PP(WR)- Glass reinforced polypropylene
CFF/E-CTFE(GF)- EthylenchloroTrifluoroEthylene carbon filled(20%)
Carb. H.D.- High density carbon
SiC- Silicon Carbide
CER- Alumina ceramic at 99.7%- hi purity
FKM(V)- Fluorinated elastomer
FFKM(K)- Perfluor elastomer
EPDM- EthylenePropylene rubber
NPT m- Male NPT
NPT f- Female NPT
ND- Nominal diameter
ANSI- Ref. flange ANSI B 16.5- flat face
Table1 - Case Materials
| Version |
Reinforced Polymers |
Process Min Temp. |
Process Max. Temp. |
Ambient temp. |
| WR |
GFR-PP |
-5oC (23oF) |
80oC (176oF) |
0-40oC (32...104oF) |
| GF |
CFF-E-CTFE |
-30oC (-22oF) |
110oC (230oF) |
-20-40oC (-4...104oF) |
Table2 - Materials Model AM45
| Pump Model |
AM-45-WR |
AM-45-GF |
| Pump Version |
R |
R |
| Volute Casing |
GFR-PP |
CFF-E-CTFE |
| Rear Casing |
| Centrifugal Impeller |
| Guide Bushing |
Carb. HD |
Carb. HD |
| Shaft |
CER |
CER |
| Thrust Bushing |
CER |
CER |
| O Ring Gasket |
FKM (1) |
FKM (1) ; (2) |
| Screws |
304 SS |
304 SS |
Table3 - Materials Models AM250P, 350P, 500P
| Pump Model |
AM-XXXP-WR |
AM-XXX-GF |
| Pump Version |
R |
X1 |
R |
X2 |
| Volute Casing |
GFR-PP |
CFF-E-CTFE |
| Rear Casing |
| Centrifugal Impeller |
| Guide Bushing |
Carb. HD |
|
Carb. HD |
|
| Shaft |
CER |
CER |
SiC |
SiC |
| Thrust Bushing |
CER |
CER |
SiC |
SiC |
| O Ring Gasket |
FKM (1) |
FKM (1) ; (2) |
| Screws |
304 SS |
304 SS |
Upon request: (1) EPDM and (2) FFKM
FLOW DATA
Table4 - Impeller Selection
| Liquid Specific Gravity Limits At Max Flow |
| Impeller |
Specific Gravity Limit (kg/dm3) |
| H |
1.1 |
| K |
1.4 |
| L |
1.9 |
| Actual RPM at max. capacity |
| Pump Model |
45 |
250P |
350P |
500P |
| RPM |
3400 |
3200 |
3200 |
3300 |
Flow Curves are for water at 20°C
SPECIFICATIONS
| Pump Model |
AM45 |
AM250P |
AM350P |
AM500P |
| Inlet |
1/2” NPT m |
3/4” NPT f |
1” NPT m |
1-1/4” NPT m |
| Outlet |
3/8” NPT m |
3/4” NPT m |
1” NPT m |
1” NPT m |
| ANSI Flanges |
N/A |
N/A |
1” |
1” |
| Power |
45W |
1/3 HP |
1/2 HP |
3/4 HP |
| Type |
single-phase |
three-phase |
three-phase |
three-phase |
| Voltage |
208-230 |
208/230-460 |
| Motor Size |
Special |
NEMA 56C |
| Max Inlet Pressure |
22 PSI |
| Medium Viscosity |
<20 cSt |
| Weight |
8.8 lb |
28.5 lb |
31 lb |
37.5 lb |
| Model |
AM45 (mm) |
AM45 (inches) |
| a1 |
34 |
1-11/32 |
| L |
225 |
|
| G |
120 |
4-3/4 |
| Q |
40 |
1-9/16 |
| h1 |
60 |
2-3/8 |
| h2 |
75 |
2-31/32 |
| S |
Ø 9.5 |
Ø 3/8 |
| r |
90 |
3-9/16 |
| R |
Ø 102.3 |
Ø 4 |
| m1 |
40 |
1-9/16 |
| n1 |
100 |
3-15/16 |
| Dimensions in inches |
| Model |
250P |
350P |
500P |
| a1 |
2-7/16 |
2-7/16 |
2-7/16 |
| a1.1 |
2-7/16 |
2-7/16 |
2-7/16 |
| L |
12-1/4 |
12-1/4 |
12-1/4 |
| HD |
6-1/2 |
6-1/2 |
6-1/2 |
| Q |
1-27/32 |
1-15/16 |
2-3/32 |
| h1 |
3-1/2 |
3-1/2 |
3-1/2 |
| h2 |
3-15/16 |
3-15/16 |
3-15/16 |
| h2.1 |
3-15/16 |
3-15/16 |
3-15/16 |
| S |
11/32 |
11/32 |
11/32 |
| r |
8-3/16 |
8-3/16 |
8-3/16 |
| r1 |
5-5/8 |
5-5/8 |
5-5/8 |
| R |
5-3/4 |
5-3/4 |
5-3/4 |
| m1 |
3 |
3 |
3 |
| n1 |
4-7/8 |
4-7/8 |
4-7/8 |
| KM |
2-3/4 |
3-1/8 |
3-1/2 |
| KA |
2-3/4 |
3-1/8 |
3-1/2 |
| dxz |
5/8 x 4 |
5/8 x 4 |
5/8 x 4 |
| Flanges are per ANSI B 16.5- Flat Face |
ORDERING INFORMATION
AM-A-B-C-D-E-F-G-H-I
EXAMPLE: AM-250P-GF-H-V-R-N-U-N-3
| A= Model |
B= Pump Body
(Table 2) |
C=Impeller
(Table 4) |
D=
O-Ring Gasket |
E=Materials
(Tables 2&3) |
F=Connections |
G=Motor |
H=Motor Detail |
I=Motor Phases |
| 45 |
WR
GK
|
H
K
L
|
V=FPM
E=EPDM
K=FFKM
|
R
X
|
N=NPT
A=ANSI Flange |
U=NEMA |
N=Standard
S=Special Voltage
E=Ex-Proof
0=Without Motor
|
1=Single Phase
3=Three Phase
|
| 250P |
| 350P |
| 500P |
For assistance call 978-568-3400
|
|
|
|
|
|
|
|
|
pumps | valves | instrumentation | new products | contact clark | site/product directory | enewsletter | home
|
|
